Hood Mounted Turn Signals

Technical Question and Answer - On topic to 71-74 Plymouth B-bodies only.

Moderator: Site Administrators

Post Reply
User avatar
72GY9Runner
GTX (RS)
Posts: 121
Joined: Wed May 25, 2005 11:13 am
My Cars: 72 Plymouth Road Runner GY9,Ember Gold interior, 400 Auto with AC, strobe stripe and canopy vinyl.
Location: Alberta, Canada

Hood Mounted Turn Signals

Post by 72GY9Runner » Mon May 07, 2007 4:21 pm

Last question for the day, I promise. (fingers crossed)

What is the correct routing for the wires that go up to the hood mounted turn signals? It seems like there is enough wire to go around the engine compartment 50 times. :lol:

I don't plan on putting the hood insulation in at this time, so I'm hoping they didn't just stuff it under there.
Dave Lutz
57 Plymouth Plaza Sedan, 58 Dodge Regent 2Dr Hardtop, 65 Valiant (273 Commando -Canadian built), 67 Satellite, 67 Polara, 70 Cuda, 72 Runner, 78 Dodge Diplomat 2Dr
Top
User avatar
Eric
Site Admin
Posts: 2598
Joined: Wed Dec 24, 2003 12:45 am
Location: Central Ohio
Contact:
Contact Eric

Post by Eric » Mon May 07, 2007 7:43 pm

check through the old threads, I believe there was a post about this a few months ago
AKA Butterscotch71....the road runner nest is out to win you over this year!Image
Top
User avatar
72GY9Runner
GTX (RS)
Posts: 121
Joined: Wed May 25, 2005 11:13 am
My Cars: 72 Plymouth Road Runner GY9,Ember Gold interior, 400 Auto with AC, strobe stripe and canopy vinyl.
Location: Alberta, Canada

Post by 72GY9Runner » Tue May 08, 2007 11:16 am

I had done a search but the topics I found were more about which cars came with them on the hood.

I'll poke a little deeper and see if I find anything else.
Dave Lutz
57 Plymouth Plaza Sedan, 58 Dodge Regent 2Dr Hardtop, 65 Valiant (273 Commando -Canadian built), 67 Satellite, 67 Polara, 70 Cuda, 72 Runner, 78 Dodge Diplomat 2Dr
Top
User avatar
road chicken
GTX (RS)
Posts: 668
Joined: Thu Oct 09, 2003 11:21 pm
Location: SE WI

Post by road chicken » Wed May 09, 2007 5:13 pm

If memory serves....correctly-- the A0-1 cars had those plug in by the front directionals.

Mine wasn't an a01 car so I just spliced in to the front directional wire inthe harness.
4th generation B bodys- there is no substitute.
68 383, Street Demon 750, RPM top end,484/284/108 poo poo cam "-5 spd 4:10 SG, 4whl disk, Helwig Anti-Sway, Poly bushings,Firm Feel Box, HD Linkage, 1" t-bars, 7 leafs Springs
Top
Ronnman
Satellite Sebring Plus (RP)
Posts: 83
Joined: Wed Apr 25, 2007 9:43 pm
Location: Slidell, LA

Hood Mounted Turn Signal Wiring Routing

Post by Ronnman » Sun May 13, 2007 1:58 pm

Dave,
I have a 71 Road Runner with the hood mounted turn signals. I beleive the routing to be original. The connector are the original and are falling apart. the wires run along the hood towards the brake booster where they connect to some round push in connectors. Anyway, I've attached a pic to show how they are routed. Hope this helps some.
Ron
Attachments
hood turn signal wires 1small.jpg
hood turn signal wires 1small.jpg (218.99 KiB) Viewed 6581 times
Top
User avatar
72GY9Runner
GTX (RS)
Posts: 121
Joined: Wed May 25, 2005 11:13 am
My Cars: 72 Plymouth Road Runner GY9,Ember Gold interior, 400 Auto with AC, strobe stripe and canopy vinyl.
Location: Alberta, Canada

Post by 72GY9Runner » Mon May 14, 2007 11:16 am

That's exactly what I was looking for.

Thanks lots!!!
Dave Lutz
57 Plymouth Plaza Sedan, 58 Dodge Regent 2Dr Hardtop, 65 Valiant (273 Commando -Canadian built), 67 Satellite, 67 Polara, 70 Cuda, 72 Runner, 78 Dodge Diplomat 2Dr
Top
Post Reply

Return to “Question and Answer”