Page 1 of 1
repro non rally dash tach
Posted: Thu Aug 20, 2015 6:28 am
by Philcollins1
Re: repro non rally dash tach
Posted: Thu Aug 20, 2015 8:45 am
by 71bird
Doesn't look like a 71 to me.
Re: repro non rally dash tach
Posted: Thu Aug 20, 2015 10:06 am
by moparite
X2 There are a few places that will update the factory tacks to solid state electronics and new looking gauge faces. Believe less then a 1/4 of what you hear on ebay!
http://www.tachman.com/mopar.htm
Re: repro non rally dash tach
Posted: Thu Aug 20, 2015 5:35 pm
by 71bird
I like the tach board from Real Time engineering.
Re: repro non rally dash tach
Posted: Thu Aug 20, 2015 7:54 pm
by Philcollins1
I've got a Sebring with the standard dash, not the rally type. Tere wasn't a factory tach offered for my car so....
Re: repro non rally dash tach
Posted: Sun Aug 23, 2015 6:43 pm
by mrsnicks
I considered those for my stand gauge cluster... Then started thinking clearly and just put a rallye gauge with tach in it.
Patrick
Re: repro non rally dash tach
Posted: Mon Aug 24, 2015 7:52 am
by Philcollins1
Patrick, when you did your swap, did you change the underdash harness ?
Alain
Re: repro non rally dash tach
Posted: Mon Aug 24, 2015 10:59 am
by mrsnicks
I used my existing harness in the car. The cluster came with the wires attached, but cut about 8-10 inches back from the plugs. So I cut my cluster harness at the round plug and used this
http://www.ebay.com/itm/370882918061?_t ... EBIDX%3AIT
to join them together.
It helped to have a factory wiring diagram.
Patrick
Re: repro non rally dash tach
Posted: Mon Aug 24, 2015 10:42 pm
by 71Satellite98661
I think it's cool. Seems like I hardly ever see standard instrument clusters much these days and this could possibly be a decent compromise in lieu of a swap. I just wish these repro tach were made in the correct 0-7000 rpm range.