Page 1 of 1
air grabber project
Posted: Wed Jul 19, 2006 5:54 pm
by bandman
I am going to post some of my pictures for my project. I will keep a couple up for a little while (what ever I am allowed). Then I will take those down and post more. This is from the beginning step by step.
Here I marked off the hood and prepared to cut the hole.
Dimensions on hood:
from front 15"
from rear 21.5"
the
hole should be 21" from front to back
from the
center the hole should be 18"
at the front the reinforcement brace should hang out 1.75"
rear 4 holes should be 7/8"
Posted: Wed Jul 19, 2006 6:10 pm
by bandman
Here I taped off the hole (I didn't feel confident cutting free hand).
The semi finished product (no stud holes at the time)
Posted: Wed Jul 19, 2006 6:16 pm
by bandman
Here is one of the first studs in the bubble from Stinger Fiberglass.
Note the stud is in fine side up (straight from stinger). The stud would be too long if I tried the other way.
Posted: Mon Jul 24, 2006 9:51 am
by bandman
From this picture you can see I took a peice of cardboard and laid the airgrabber bubble on top of it. Then I took the cardboard, put it on the hood and marked it off. From there I just drilled the holes. With a little more work I laid the bubble on top of the hood and it slide right in. If I were to learn from my mistakes and do it again, I would probably use paper instead of cardboard. I think it would have less room for error.
Posted: Mon Jul 24, 2006 7:42 pm
by mopar71
Nice Job, I wish I could download your pics ,I want to install an air grabber down the road,Right now I am concentrating on getting body work done first.
Posted: Tue Sep 19, 2006 11:14 am
by ccb_v2
Ack. Pics are gone. Was gonna nab a copy since my Stinger Fiberglass parts arrived yesterday.
Posted: Tue Sep 19, 2006 11:53 am
by bruce
Sorry, we may have lost some pics in a move we made in hosting the site. I'll address the issue with Dave.
Posted: Tue Sep 19, 2006 12:08 pm
by Dave
He didn't have those pic's attached to his message. They were linked from photobucket. Looks like he took those pic's down.
Posted: Tue Sep 19, 2006 12:11 pm
by bruce
Ah, and there's the answer!
Thanks for chiming in Dave-man!
Posted: Wed Sep 20, 2006 8:41 pm
by ccb_v2
I see. Was gonna use them to help with my winter project.
Posted: Thu Oct 05, 2006 5:32 pm
by bandman
Sorry,
I will put the pictures back up. I don't know how to attach them to the message, but I will put them back as soon as I get back to photobucket.
Dennis
Posted: Fri Oct 06, 2006 11:06 am
by ccb_v2
If you want you can send the pics to me and I can toss them up on a host.